Home/Solid Round Tools/Milling/High Performance Aluminum End Mills/1/2" Dia, 3 Flute, Corner Radius End Mill - 34779
1/2" Dia, 3 Flute, Corner Radius End Mill - 34779
SERIES: 43CR
S-Carb
1/2" Dia, 1-1/4" LOC, 1/2" Shank Dia, 0.0300" Radius, 3 Flute, 38 Degree Helix, Uncoated, Series 43CR, S-Carb, Corner Radius End Mill - 34779
Feature & Benefits
Circular land allows for increased control at various speed and feed rates and reduces chatter
Symmetrical end gashing for excellent balance at high speeds and aggressive plunging capability
Open fluting for deep slotting and profiling
Enhanced corner geometry with tight tolerance corner radii
Recommended for materials ≤ 150 Bhn (≤ 7 HRc)
Series Description | S-Carb |
---|---|
High Performance | Yes |
Number of Flutes | 3 |
Secondary Workpiece Material | Plastics & Composites |
Shank Length (LS) (Decimal Inch) | 2.0000 |
Cutting Diameter (DC) Tolerance (Decimal Inch) | +0.0000/-0.00043 |
Cutting Diameter (DC) Tolerance (mm) | +0.000/-0.011 |
Shank Diameter (DCON) Tolerance (ISO) | h6 |
Corner Radius (RE) Tolerance (Decimal Inch) | +0.0000/-0.0020 |
Corner Radius (RE) Tolerance (mm) | +0.000/-0.050 |
Additional Geometry | Right Hand Cut Direction (RHC) |
Helix Angle | Right Spiral |
Helix Angle (Degree) | 38 |
Variable Helix | No |
Chip Breaker | No |
US Stock | 100 |
Shank Type | Straight |
Cutting Diameter (DC) (Fractional Inch) | 1/2 |
Length of Cut (APMX) (Fractional Inch) | 1-1/4 |
Overall Length (LF) (Fractional Inch) | 3-1/4 |
Shank Length (LS) (Fractional Inch) | 2 |
Rake Angle | Positive |
Shipping Weight | 0.2740 |
Center Cutting | Yes |
Series | 43CR |
Weldon Flat | No |
Shank Length (LS) (mm) | 50.80 |
Shank Diameter (DCON) (Fractional Inch) | 1/2 |
Tool Length | Regular |
End Configuration | Corner Radius |
Shank Diameter (DCON) (Decimal Inch) | 0.5000 |
Shank Diameter (DCON) (mm) | 12.70 |
Length of Cut (APMX) (Decimal Inch) | 1.2500 |
Length of Cut (APMX) (mm) | 31.75 |
Overall Length (LF) (Decimal Inch) | 3.2500 |
Overall Length (LF) (mm) | 82.55 |
Corner Radius (RE) (Decimal Inch) | 0.0300 |
Corner Radius (RE) (mm) | 0.76 |
Coolant Option | External Coolant |
Coating Description | Bright/Uncoated |
Flute Type | Spiral |
Unit (inch/mm) | inch |
Primary Workpiece Material | (N) Non-Ferrous Materials |
Cutting Diameter (DC) (Decimal Inch) | 0.5000 |
Cutting Diameter (DC) (mm) | 12.70 |