Home/Solid Round Tools/Milling/High Performance End Mills/1" Dia, 5 Flute, Square End End Mill - 38522
1" Dia, 5 Flute, Square End End Mill - 38522
SERIES: Z5S
Z-Carb-HPR
1" Dia, 1-1/8" LOC, 1" Shank Dia, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 38522
Feature & Benefits
An ideal balance of helix, indexing, flute depth, rake and relief
Variable indexing for chatter supression and patented edge geometry for shearing and strength
Chatter-free geometry allows deep cutting and high speed machining
Central coolant hole delivers coolant effectively to the cutting zone enhancing chip removal when pocketing or slotting
Enhanced corner geometry with tight tolerance corner radii
Excels at roughing, ramping, high speed machining and finishing in a variety of materials
Series Description | Z-Carb-HPR |
---|---|
High Performance | Yes |
End Configuration | Square End |
Tool Length | Stub |
Unit (inch/mm) | inch |
Number of Flutes | 5 |
Primary Workpiece Material | (P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy |
Secondary Workpiece Material | (H) Hardened Materials |
Cutting Diameter (DC) (Decimal Inch) | 1.0000 |
Cutting Diameter (DC) (Fractional Inch) | 1 |
Cutting Diameter (DC) (mm) | 25.40 |
Shank Diameter (DCON) (Decimal Inch) | 1.0000 |
Shank Diameter (DCON) (mm) | 25.40 |
Length of Cut (APMX) (Decimal Inch) | 1.1250 |
Length of Cut (APMX) (Fractional Inch) | 1-1/8 |
Length of Cut (APMX) (mm) | 28.58 |
Overall Length (LF) (Decimal Inch) | 4.0000 |
Overall Length (LF) (Fractional Inch) | 4 |
Overall Length (LF) (mm) | 101.60 |
Non-Cutting Center Diameter (NCD) (Decimal Inch) | 0.3500 |
Non-Cutting Center Diameter (NCD) (mm) | 8.89 |
Cutting Diameter (DC) Tolerance (Decimal Inch) | +0.0000/-0.0020 |
Cutting Diameter (DC) Tolerance (mm) | +0.000/-0.050 |
Shank Diameter (DCON) Tolerance (ISO) | h6 |
Shank Type | Straight |
Coolant Option | Internal Coolant |
Additional Geometry | Right Hand Cut Direction (RHC) |
Rake Angle | Positive |
Helix Angle | Right Spiral |
Helix Angle (Degree) | 37 |
Variable Helix | No |
Chip Breaker | No |
US Stock | 0 |
Shipping Weight | 1.5520 |
Center Cutting | No |
Series | Z5S |
Weldon Flat | No |
Shank Diameter (DCON) (Fractional Inch) | 1 |
Coating Description | AlTiN (Ti-NAMITE-A) |