10.00mm Dia, 3 Flute, Corner Radius End Mill - 43480
SERIES: 33MC
Series 33
10.00mm Dia, 27.00mm LOC, 10.00mm Shank Dia, 1.50mm Radius, 3 Flute, 32-48 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 33MC, Series 33, Corner Radius End Mill - 43480
Feature & Benefits
Specially engineered step core design provides stability for aggressive ramping and rigidity when flutes are completely engaged
Open design at axial end accommodates material flow and load reduction during machining operations
Enhanced corner geometry with tight tolerance corner radii
Recommended for materials ≤ 45 HRc (≤ 420 Bhn)
| Series Description | Series 33 |
|---|---|
| Number of Flutes | 3 |
| Shank Type | Straight |
| Weldon Flat | No |
| High Performance | Yes |
| Helix Angle | Variable Right Spiral |
| Secondary Workpiece Material | (H) Hardened Materials |
| Helix Angle (Degree) | 32-48 |
| Chip Breaker | No |
| Additional Geometry | Right Hand Cut Direction (RHC) |
| Tool Length | Regular |
| Rake Angle | Positive |
| Cutting Diameter (DC) Tolerance (Decimal Inch) | +0.0000/-0.0016 |
| Cutting Diameter (DC) Tolerance (mm) | +0.000/-0.040 |
| Shank Diameter (DCON) Tolerance (ISO) | h6 |
| Shank Length (LS) (Decimal Inch) | 1.7716 |
| Shank Length (LS) (mm) | 45.00 |
| Corner Radius (RE) Tolerance (Decimal Inch) | +0.0000/-0.0020 |
| Corner Radius (RE) Tolerance (mm) | +0.000/-0.050 |
| Center Cutting | Yes |
| Variable Helix | Yes |
| Series | 33MC |
| Shipping Weight | 0.1300 |
| End Configuration | Corner Radius |
| Shank Diameter (DCON) (Decimal Inch) | 0.3937 |
| Shank Diameter (DCON) (mm) | 10.00 |
| Length of Cut (APMX) (Decimal Inch) | 1.0630 |
| Length of Cut (APMX) (mm) | 27.00 |
| Overall Length (LF) (Decimal Inch) | 2.8346 |
| Overall Length (LF) (mm) | 72.00 |
| Corner Radius (RE) (Decimal Inch) | 0.0591 |
| Corner Radius (RE) (mm) | 1.50 |
| Coolant Option | External Coolant |
| Coating Description | AlTiN (Ti-NAMITE-A) |
| Flute Type | Spiral |
| Unit (inch/mm) | mm |
| Primary Workpiece Material | (P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy |
| Cutting Diameter (DC) (Decimal Inch) | 0.3937 |
| Cutting Diameter (DC) (mm) | 10.00 |