5.00mm Dia, 3 Flute, Ball Nose End Mill - 44924
SERIES: 43MB
S-Carb
5.00mm Dia, 15.00mm LOC, 26.00mm Reach, 6.00mm Shank Dia, 3 Flute, 38 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 43MB, S-Carb, Ball Nose End Mill - 44924
Feature & Benefits
Circular land allows for increased control at various speed and feed rates and reduces chatter
Open fluting for deep slotting and profiling
Ball end design ideal for finishing operations in complex workpieces
Recommended for materials ≤ 150 Bhn (≤ 7 HRc)
| Series Description | S-Carb |
|---|---|
| High Performance | Yes |
| Number of Flutes | 3 |
| Secondary Workpiece Material | Plastics & Composites |
| Shank Length (LS) (Decimal Inch) | 1.8898 |
| Cutting Diameter (DC) Tolerance (Decimal Inch) | +0.0000/-0.00032 |
| Cutting Diameter (DC) Tolerance (mm) | +0.000/-0.008 |
| Shank Diameter (DCON) Tolerance (ISO) | h6 |
| Corner Radius (RE) Tolerance (Decimal Inch) | +0.0005/-0.0005 |
| Corner Radius (RE) Tolerance (mm) | +0.013/-0.013 |
| Additional Geometry | Right Hand Cut Direction (RHC) |
| Helix Angle | Right Spiral |
| Helix Angle (Degree) | 38 |
| Variable Helix | No |
| Chip Breaker | No |
| US Stock | 24 |
| Shank Type | Straight |
| Rake Angle | Positive |
| Shipping Weight | 0.0460 |
| Center Cutting | Yes |
| Series | 43MB |
| Weldon Flat | No |
| Shank Length (LS) (mm) | 48.00 |
| Tool Length | Long Reach Neck |
| End Configuration | Ball Nose |
| Shank Diameter (DCON) (Decimal Inch) | 0.2362 |
| Shank Diameter (DCON) (mm) | 6.00 |
| Length of Cut (APMX) (Decimal Inch) | 0.5906 |
| Length of Cut (APMX) (mm) | 15.00 |
| Reach (LU) (Decimal Inch) | 1.0236 |
| Reach (LU) (mm) | 26.00 |
| Overall Length (LF) (Decimal Inch) | 2.4803 |
| Overall Length (LF) (mm) | 63.00 |
| Neck Diameter (DN) (Decimal Inch) | 0.1770 |
| Neck Diameter (DN) (mm) | 4.50 |
| Coolant Option | External Coolant |
| Coating Description | TIB2 (Ti-NAMITE-B) |
| Unit (inch/mm) | mm |
| Primary Workpiece Material | (N) Non-Ferrous Materials |
| Cutting Diameter (DC) (Decimal Inch) | 0.1969 |
| Cutting Diameter (DC) (mm) | 5.00 |
| Flute Type | Spiral |