Home/Solid Round Tools/Milling/High Performance Aluminum End Mills/5/8" Dia, 3 Flute, Chip Breaker Corner Radius End Mill - 33557
5/8" Dia, 3 Flute, Chip Breaker Corner Radius End Mill - 33557
SERIES: 43CB
S-Carb
5/8" Dia, 3/4" LOC, 3-3/8" Reach, 5/8" Shank Dia, 0.0300" Radius, 3 Flute, 38 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 43CB, S-Carb, Chip Breaker Corner Radius End Mill - 33557
Feature & Benefits
Circular land allows for increased control at various speed and feed rates and reduces chatter
Symmetrical end gashing for excellent balance at high speeds and aggressive plunging capability
Chip breakers reduce machine loads up to 15% for increased roughing feed rate capability
Open fluting for deep slotting and profiling
Necked design with blended diameter transitions provide clearance to reach
Recommended for materials ≤ 150 Bhn (≤ 7 HRc)
Series Description | S-Carb |
---|---|
High Performance | Yes |
End Configuration | Chip Breaker (CR) |
Unit (inch/mm) | inch |
Number of Flutes | 3 |
Primary Workpiece Material | (N) Non-Ferrous Materials |
Secondary Workpiece Material | Plastics & Composites |
Cutting Diameter (DC) (Decimal Inch) | 0.6250 |
Cutting Diameter (DC) (mm) | 15.88 |
Shank Diameter (DCON) (Decimal Inch) | 0.6250 |
Shank Diameter (DCON) (mm) | 15.88 |
Length of Cut (APMX) (Decimal Inch) | 0.7500 |
Length of Cut (APMX) (mm) | 19.05 |
Reach (LU) (Decimal Inch) | 3.3750 |
Reach (LU) (mm) | 85.73 |
Overall Length (LF) (Decimal Inch) | 6.0000 |
Overall Length (LF) (mm) | 152.40 |
Neck Diameter (DN) (Decimal Inch) | 0.6050 |
Neck Diameter (DN) (mm) | 15.37 |
Corner Radius (RE) (Decimal Inch) | 0.0300 |
Corner Radius (RE) (mm) | 0.76 |
Shank Length (LS) (Decimal Inch) | 2.6250 |
Cutting Diameter (DC) Tolerance (Decimal Inch) | +0.0000/-0.00043 |
Cutting Diameter (DC) Tolerance (mm) | +0.000/-0.011 |
Shank Diameter (DCON) Tolerance (ISO) | h6 |
Corner Radius (RE) Tolerance (Decimal Inch) | +0.0000/-0.0020 |
Corner Radius (RE) Tolerance (mm) | +0.000/-0.050 |
Coolant Option | External Coolant |
Additional Geometry | Chip Breaker / Right Hand Cut Direction (RHC) |
Helix Angle | Right Spiral |
Helix Angle (Degree) | 38 |
Variable Helix | No |
Chip Breaker | Yes |
US Stock | 0 |
Shank Type | Straight |
Cutting Diameter (DC) (Fractional Inch) | 5/8 |
Length of Cut (APMX) (Fractional Inch) | 3/4 |
Reach (LU) (Fractional Inch) | 3-3/8 |
Overall Length (LF) (Fractional Inch) | 6 |
Shank Length (LS) (Fractional Inch) | 2-5/8 |
Rake Angle | Positive |
Shipping Weight | 0.8750 |
Center Cutting | Yes |
Series | 43CB |
Weldon Flat | No |
Shank Length (LS) (mm) | 66.68 |
Shank Diameter (DCON) (Fractional Inch) | 5/8 |
Tool Length | Long Reach Neck |
Coating Description | TIB2 (Ti-NAMITE-B) |